bonded joint

The peel force of LWB joint is far greater than that of adhesive bonded joint.

激光胶接焊接头的抗剥离力远大于胶接接头的抗剥离力。

The results showed that the aging of epoxy bonded joint in water was accelerated by increasing temperature.

结果表明，提高温度可以加速环氧胶接接头在水中的老化；

Experimental study on vacuum performance of adhesively bonded joint under cyclic load

循环载荷下粘接接头真空性能的实验研究

Effect of Alkaline Anodization Treatment of Durability of Titanium/ Epoxy Bonded Joint

碱性阳极化处理对钛合金／环氧胶接接头耐久性的影响

the effect of temperature on the aging performance of epoxy bonded joint in water was researched, and its failure mechanism was analyzed by sem and ftir.

主要研究了环氧胶接接头在不同温度水中的老化行为，并用扫描电镜（SEM）和傅立叶红外光谱仪（FTIR）分析了其失效的机理。

In this study, effect of cyclic load on the vacuum tightness of the adhesively bonded joint was investigated experimentally.

该文实验研究了循环载荷对粘接接头气密性的影响。

Tensile sample fracture is of typical toughness. Quench aging can significantly improve the strength and toughness of bonded joint and matrix, make the strengthening phase disperse in matrix, and eliminate local massive cleavage fracture.

淬火时效能显著提高接头和基体的强度与韧性，使强化相弥散分布于基体，消除块状局部解理断裂。

The results of the joint research work done by Energy Research Institute of Henan Academy of Sciences, China and Research Institute For The Electrical Industry, Hungary in the field of plastic-bonded Ni-electrode, fiber Ni-electrode and foam Ni-electrode were comprehensively reported.

本文综合报告了我们与匈牙利工业电力研究所在塑料粘结镍电极，泡沫镍电极以及纤维毡镍电极方面的共同研究结果。

Damage to the bonded joint if the waiting time is not observed before further work!

如不遵守等待时间而急于展开下一步工作，粘合处将受损！

Effect of process parameters and interlayer on properties of 1420 Al-Li alloy diffusion bonded joint

1420铝锂合金扩散焊工艺及中间层材料对接头性能的影响

Review on residual thermal stress of ceramic bonded joint with metal

陶瓷与金属焊接接头残余热应力研究